Do you want to catch carp in a pond and looking for the right technique to target the fish?

Well, there is hundreds of small water like ponds around a city that we find on the way to a big lake. Such small water sources could be a good source of the fish you want to catch thereby experiencing a great local fishing day.

Carp are basically famous as still water fishes, but their breeding population has developed successfully in ponds, lakes, rivers as well as canal system. Carp fishing in a pond could be very exciting if you could keep the valuable tips in mind and follow the right technique.

To help you in the process, we have come up with a list of how to catch carp in a pond.

Step-by-Step Instructions: How t o Catch Carp in a Pond

Step 1: Finding A Suitable Place To Catch

A pond is a good place to catch carp as this water body consists of aquatic plants across its entire length along with other animals and insects that form an excellent food source for carp.

The fish is known to favor shallow water at the time of hot weather and deep water during cold. However, you would have to select such a pond area where you could sit comfortably for some hours.

This is because fishing for carp would require much patience.

Step 2: Casting The Line In Water

If you find a full number of carp feeding, you would not then directly cast on the top as they are known to panic quickly.

Hence, in such a situation, you would have to cast in front of the current where the carp could swim for feeding.

It will be easier to cast the line in the pond water if the weights are attached closer to the float.

Step 3: Wait For The Bite

Being an intelligent fish species, carp would feed on around the hook. In certain times, they could even take the full bait before you come to know.

Hence, you would have to sit now and observe the float attentively. If the float shows any up and down movement, it is possible that the carp is gnawing the bait.

However, you could even confuse between carp biting and water current, so you would have to make sure about it before reeling in.

Step 4: Employing Lift Method

If you see that the float is raising out of the water instead of submerging, then it would indicate that the carp is eating the bait.

In such a case, you would have to wait till the float comes out of the water. Then, jerking your back in an upward direction, you would have to start reeling in.

This would eventually hook the carp in its mouth.

Step 5: Reeling In The Catch

As soon as your capture takes the real bite out of the hook, you would have to hold on tightly the pole and start pulling it smoothly upwards.

Step 6: Scooping The Catch Out Of The Water

Using a net would be a great option to pull the carp safely out of the water. When the carp gets tired, you would have to put it in the net.

Put one hand on its belly’s bottom to hold the fish and the other hand on the tail. Once you get the fish out of the water, you would have to take off the hook from its mouth.

Conclusion

Well, this was all that had on our list of how to catch carp in a pond. Pond fishing for carp could be very exciting as it contains most of the things that carp are known to feed.

Like we mentioned earlier that carp are quite intelligent fishes and they could take the entire bait without even letting you know. Hence, you would have to know the right technique and other indications of the fish to get hold of it at the right time.

We hope that the list mentioned above would help you a lot in catching the fish effectively. Well, if you have any suggestion, do let us know in the comments.

Is sheepshead going to be your next catch to add a new experience in your fishing diaries?

Well, there is no doubt that this inshore member of family porgy is one of the notorious bait stealers on jetties. Sheepshead is a flat, thick fish having notable black bars on their grayish to the white body.

These notorious stealers of bait are even known as convict fish. The mouth consists of large projecting teeth which are quite similar to that of sheep.

However, the spines on the dorsal as well as the anal fins of this species are known to be much heavy and sharp. You would have to be very careful while catching the fish for avoiding the tips of the fins.

Are you looking for the right technique to fillet Sheepshead perfectly? Well, learning to clean and filleting a Sheepshead is often ignored.

This is a fish which is even not a popular target for anglers. Sheepsheads are not regarded exactly as trash fish, but they make their way to fisher's table less.

You would have to learn how to fillet sheepshead apparently before eating them and once you learn the proper technique of filleting it, you would be halfway there.

Hence, we are going to help you to apprehend the right method of filleting a sheepshead so that you could prepare it exclusively to put it on your table. If you are interested, then just continue reading below.

Step 2: Second Cut

After the first cut is done, you would have to go on for the second cut. You would have to start making a curving second cut starting at the initial cut, just over the lateral line at the back.

You would have to then cut downwards up to the anus of the sheepshead.

Step 3: Cutting The Flesh From The Backbone

Now you would have to flip the fish so that the back side of the fish faces you. Taking your fillet knife, you will be inserting it near the fish's backbone down to its rib cage.

As soon as the fillet knife moves through the rib cage, you would have to put it in every way through the fish. After doing this, you would have to cut the flesh from the backbone.

However, you will have to make sure that you are not cutting through the tab of the skin in front of the fish's tail.

Step 4: Cutting The Remaining Points

​At this step, you would have to start from in front of the fillet and cut away the points that are still there where the fillet is attaching to the structure of the fish.

Step 5: Cutting Through The Tab

This is the stage where you would have to cut the tab. Once the fillet becomes entirely free, you would have to start cutting through the tab attached to it till the tail portion. It would set aside the fillet perfectly.

Step 6: Repeating The First Two Steps

Now, you would have to repeat the first two processes for the other side of your catch. You would have to again start cutting from behind the fish’s head vertically till the backbone.

And then start making the second curve cut just over the lateral line at the back and then proceed down to the fish’s anus.

This time on this side you would have to cut the skin tab that holds the fillet with the tail.

Step 7: Cutting Points If Any

On this side, you would begin from the tail and crop up any points where the fillet is found attached to the structure of the fish still.

Step 8: Cutting The Skin

After you cut loose the fillet, you would have to keep it on the clean surface keeping down the skin side.

You will be holding it in place with the help of the finger tips on the tail end of the fish fillet. Taking the fillet knife in your other hand, you would have to cut loose the fillet from the skin from just over the skin.

This would keep the red flesh on the skin.

Step 9: Removing A Little Segment

At this stage, you would have to crop and then throw away a small portion from the fillet through the lateral line for removing the pin bone.

After doing this, you would have to repeat the same steps for all the other fillets.

Conclusion

This was all that we thought to include on the list how to fillet sheepshead. Like we already said before that sheepshead might not be the first choice for many people or anglers due to their thick rib bones, sharp spines and protruding razor like teeth.

But the fish could be enchanting on the table.We hope that the list mentioned above of how to fillet sheepshead would help you immensely to comprehend the perfect process of filleting this fish.

Well, do let us know how much the article helped you and if you have any suggestion, please let us know about it in the comments sections.

Now before you go out, you would have to apprehend first how to spool a spinning wheel.

Loading a spinning wheel with line might seem to be easy, but there are some important aspects which anglers would have to keep in mind.

If you don’t spool your spinning wheel correctly, you could face various problems like twisting, needless aggravations while fishing.

Hence, to help you to execute the spooling process correctly, we have brought this article explaining the proper method of spooling your spinning wheel.

Just keep on reading to know more about it.

Are you trying to setup your fly rod, but can't get enough success?

Well, this post is all about how to setup fly rod, and we are going to demonstrate each and every process in details. Some people just purchase a fly rod and don't even change a single thing. 

But that sort of thing will take a toll on your fly rod. You must take care of it, hence, setting up a fly rod on your own is pretty important.

Below we are first going to list all the items you might need for this, and after that, we are going to list down the steps necessary for the setup. 

After going through all the steps given here, you will have the exact idea of setting up a fly rod.

Are you looking for the right technique to tie two fishing lines together?

Well, tying one’s fishing knot is something that all anglers deal with. All anglers would require few things to become successful which are like a great fishing rod, right baits or lures, perfect location and the capability of tying some simple but crucial fishing lines knots.

You would get the manner of all the several types of knots on the Internet. But if you are a beginner then you won’t have to worry as we have brought up a list of how to tie two fishing lines together along with some related information.

Just hold on your interest and continue reading the article.

Step By Step Instructions: How To Tie Two Fishing Lines Using Uni-Knot

Step 1: Overlapping Ends Of Two Lines

You would have to start by overlapping the ends of two fishing lines. The lines would have to be of similar diameters, like approximately 6".

Via fish4fun.com

By taking one end of the line, you would be forming a Uni-knot circle. To form the loop, you would have to cross the two fishing lines about halfway of the overlapping distance.

Step 2: Tying The Knot

After you complete forming the knot circle, you would now have to tie the Unit-knot.

Via fish4fun.com

For doing this, you would have to make about six turns around the two fishing lines and leave the loop free.

Step 3: Forming A Tight Knot

Via fish4fun.com

You would have to make sure that your knot is sufficiently tight. At this step, you would hence, have to make the knot tight around the fishing line by pulling the tag end.

Step 4: Tying Another Unit-Knot

Via fish4fun.com

After you make a tight knot around your line, you would have to tie another knot.

A unit-knot would simply be formed by using the free end of the line that is overlapped and then pulling it snugly.

Step 5: Sliding The Knots Together

As soon as you complete tying another knot, you would have to glide the tied knots together. For pushing the knots together, you would have to drag the two standing fishing lines in the opposite directions.

Via fish4fun.com

The pull would have to be as tight as possible, and at last, the ends would have to be snipped near to the closest coil.

Conclusion

Well, this was our list that explains some of the popular knots used by the anglers and the steps to tie two fishing lines together.

Like it is already mentioned that every angler has to deal with one or the other kinds of knots and the process is quite simple. 

Moreover, the fact is that one basic knot of fishing lines could be varied to satisfy almost all requirements of tying knots in both saltwater and freshwater fishing.

Hence, we hope that our process mentioned above of how to tie two fishing lines together would help you to execute the process flawlessly.

However, if you have any suggestion regarding this topic, please mention it in the comments and also mention how much was the article helpful for you.

Are you a beginner in fishing and so pondering how to hold a fishing rod correctly?

Well, holding a fishing rod perfectly would actually determine the success rate of your fishing. It would put an effect upon the casting ability greatly than what you could expect.

A slight or simple change in holding the fishing rod would hamper your presentation. But we won't let it happen.

To help you apprehend the right technique, we have come up with a list of how to hold a fishing rod effectively. If you are interested to know about it, then please continue reading.

Are you searching for the conventional process to fillet largemouth bass? Well, Largemouth bass could be regarded as a reward for every freshwater angler.

Nothing would taste better than a perfectly cooked freshly caught bass. You would be able to clean and then cook the fish with the skin, but if you fillet it, you would not have to think about the bones.

However, filleting the fish for the first time could be tricky. To help you in the process, we have come up with the list of how to fillet a largemouth bass.

Hold your patience and go on reading.

Are you planning to add a new game experience by catching Tarpon? Well, this majestic 'Silver King' fish deserves a detailed description instead of an awful inadequate summary.

Tarpons are well known for their spectacular jumps, and it is possible certainly to land this fish species, but one would lose more than they could land.

Tarpon could survive both in saltwater as well as freshwater as they could quaff the air directly. It would be difficult to hook their bone hard mouths, and as soon as it is hooked, they would start to jump continuously hitting around wildly.